Jenoptik presents 3D metal cutting laser in Fabtech 2015

At Fabtech 2015, North America’s largest trade event for metal process technology, Jenoptik can demonstrate its laser machine series for 3D metal cutting in Hall North 2, booth 6087 from November 9 to 12 at McCormick Place in Chicago, Illinois (US).

Laser cutting permits an extremely efficient process of complicated metal components. The non-contact method minimizes prices caused by set-up time or tool wear. JENOPTIK-VOTAN BIM is designed for processing of a range of metal operating components, even though the manufacturer processes on just one laser machine, as a result of there’s no have to be compelled to use special cutting dies as throughout the traditional process. With a repeat accuracy of up to fifty µm, this laser machine ranks among the foremost precise systems of its category. Moreover, the axis movement of the robot’s laser arm are up to 60 percent quicker than those of the present robot standards, therefore giving a considerably shorter cycle time compared to alternative robot systems.

The system conception of the JENOPTIK-VOTAN BIM series is based on a beam guide within the mechanism. It permits using laser sources with an influence of up to four kW power while not having to use a complex external beam guide. At a similar time, the laser beam path prevents the laser beam from pumping effects, guaranteeing a stable beam quality. This approach permits Jenoptik to deliver its customers a technological competitive advantage.

With its metal cutting laser machine series, Jenoptik serves the automotive trade by cutting e.g. complicated automobile body and structural components furthermore as hydro-formed tubes, getting used for exhaust systems or car body rail manufacturing. JENOPTIK-VOTAN BIM is easy to integrate into production lines or combined process units.

Watch a live demonstration of the mechanism at Jenoptik’s booth 6087 in Hall North two at the Fabtech trade event from nine to twelve November.

Introduction to Revit Architecture 2016

Source: www.novuslight.com

~~~~~~~~~~~~~~~~~~~~~~

Published By

Arka Roy

www.bimoutsourcing.com

~~~~~~~~~~~~~~~~~~~~~~

Advertisement

CCS(Construction-Cad Solutions) Offering Network Design and Engineering Services in Canada

Now CCS providing BIM services healthcare solutions (HCS) provider, Swisslog, in Canada. Construction-CAD Solutions (CCS), a full-service provider of turnkey Network Design, Project Management, Site Survey and Structured Cabling solutions to communications, cable, utility and different connected industries, announces nowadays that it’s formal certification and authorization to produce its network solutions in Canada. The authorization comes because the company continues its spectacular overall client growth within the United States.

Growth of CCS, year-over-year, has been robust for several years, however 2015 is ready to break even own goals. On top of outperforming CCS here within the States, the number of international interest, received has been nothing short of astounding. CSS is approved to produce services in Canada currently and have already begun work with Swisslog’s Canadian operations; providing (BIM) (Building information Modeling) services for its HCS unit.

CCS is the most popular 3D modeller and designer for the Swisslog TransLogic® and its Pneumatic Tube System — each within the United States and in Canada. CCS provides variety of vital services for Swisslog depending on the project needs, together with BIM coordination, 3D modelling, shop drawings and installs prints. Implement of the most recent software and BIM procedures, CCS systematically outperforms client time and budget concern.

CCS provides an area of services that include design of electrical, HVAC, pneumatic tubing, plumbing and architectural work.

CCS’s BIM services include:

  • MEP coordination services
  • 3D modelling
  • Room layout mock ups
  • Perspective renderings
  • 2D to 3D conversion
  • MEP Clash detection
  • 3D walkthroughs

In addition to its latest national and international growth, CCS has arranged the groundwork for extra operations each in South America and Europe. Formal announcements are expected in Autumn 2015.

To learn a lot of regarding CCS award winning suite of Network Design, Project Management, website Survey and Structured Cabling, visit http://www.concadinc.com.

CCS:- Established in 1998, Construction-CAD Solutions (CCS) is a full-service provider of turnkey Network Design, Project Management, Site Survey and Structured Cabling solutions to telecommunications, cable, utility, and other related industries. As part of its comprehensive solutions portfolio, CCS offers Drafting, Surveying, Permitting, Engineering, and Building Information Modeling (BIM) services. CCS’s inventive ideas and custom solutions keep its client engagements on time and on budget. The team is comprised of proficient and experienced project managers, consultants, CAD technicians, designers, 3-D BIM modellers, and land surveyors. A sole-source provider to many Fortune 1000 companies, with engagements in both North and South America, CCS has built its reputation on delivering value-added network design and construction support, backed by a customer-centric philosophy that runs company-wide.

Swisslog:- Designs, develops and delivers best-in-class automation solutions for forward-thinking hospitals, warehouses and distribution centres. Swisslog is an inspiring global organization with 2 500 talented employees in more than 20 countries on four continents and customers in more than 50 countries. Headquartered in Buchs/Aarau, Switzerland, the Swisslog group is organized in two business areas, Healthcare Solutions (HCS) and Warehouse & Distribution Solutions (WDS).

For more information visit: http://www.einnews.com

~~~~~~~~~~~~~~~~~~~~~~

Published By

Arka Roy

www.bimoutsourcing.com

~~~~~~~~~~~~~~~~~~~~~~

BIM & SCAN : Integration for Prospect with Headcount Engineering

The UK 2016 government mandate expresses the need for efficient BIM methodologies, e.g. stakeholder collaboration and utilization of BIM standards, in its 2011 Government Construction Strategy, and the Irish AEC/FM sector (and EU in general) are following suit with these guidelines, standards, and protocols.

The US Department of Commerce’s National Institute of Standards and Technology (NIST) calculated an estimation in 2004 that $4.8 billion was used up every year just to confirm that the captured building information symbolizes exact building condition.

Presently the PAS 1192 documents recommend Level 2 BIM as the standard of integrated practice, but the goal of Headcount Engineering is the utilization of methodologies that will qualify the test of time and be relevant now and in the future, e.g. Level 3 utilizing open standards and virtual common data environments. These industry tendencies have been led Headcount Engineering in the directed to develop best practices in relation to Terrestrial Laser Scanning (TLS) and BIM processes, protocols, standards, and methods.

At Headcount Engineering we recognize BIM is a jointly integrated practice, i.e. utilization of Integrated Project Delivery (IPD), for the AEC/FM that co-exist with lean methods that helps in decreasing waste, project period, and risk.

The BIM process and the development of object-oriented parametric process data models, i.e. BIM Models, are a global paradigm-shift in the AEC/FM including supply chain, manufacturing, production, fabrication, etc. BIM is not 3D CAD or software that can be bought; BIM is a philosophy that starts within the mind.

BIM has two forms: An IPD process of suggested lean protocols, specification, and standards to follow, and a Virtual Design & Construction (VDC) model that is a visual data rich demonstration of the built environment to be set up and to be preserve for the facilities life cycle. A BIM is an ongoing/living virtual representation of a to-be or existing built environment. Strictly a BIM model is an “nth-Dimensional BIM” (nD BIM) object-oriented information model developed in a platform neutral open machine-readable language, i.e. Industry Foundation Classes (IFC). An IFC BIM contains parametric product data that can be utilized for imitation of code compliance, accessibility, constructability and sustainability review/analyses, safety protocols, virtual assembly, fabrication, etc.

IFC uses the EXPRESS data modelling language standard for product data models which is formalized in the Standard for the Exchange of Product model data (STEP – ISO 10303).

Headcount Engineering presently gives TLS and BIM services for many big clients here in Ireland and abroad both commercial and process plants. We have made our own unique Scan-to-BIM* and Scan-vs-BIM** techniques.

The main purpose of Scan-to-BIM and Scan-vs-BIM is to make sure the As-Built BIM model is per the specifications of the design BIM model. Scan-vs-BIM is the answer of main questions: Is what was constructed/installed built according to the design BIM? To professionally and competently answer this question Headcount Engineering provides a complete dimensional control service that combines Scan-to-BIM and Scan-vs-BIM. Dimensional control is essential to compliance control during construction and to lifecycle monitoring for Operations and Maintenance (O&M) and Facilities Management (FM). Headcount Engineering uses in-house techniques to generate precise As-Built BIM models for FM that are less costly and less prone to human error than many other conventional approaches.

We use our in-house methods, protocols, and procedures for dimensional control and compliance control, which is one of our main requests from some of the major companies in the world, particularly to process plants.

In the commercial facility and process plants sectors, our clients reach to us for the development of precise As-Built BIM’s according to BIM standards so they can correctly maintain their facilities, look at energy and the associated cost, have a accurate basis for retrofit design and construction, and have a whole historical record of their accessible facilities.

Providing ground-breaking solutions in these areas can harbor many new chances in Ireland. Our clients frequently use our services because they notice the level of improvement in the quality deliverables and services Headcount Engineering gives to them. Clients are now starting to observe the reimbursement of BIM and TLS during construction and FM & OM.

Headcount Engineering has specifically recognized that, with the fast increasing use of BIM for design, construction, and FM, and a chance has occurred to resolve major problems by aligning TLS point cloud data with the BIM model. We can rapidly charge and quantify problems and promise standard compliance is correctly controlled within specified tolerances.

The UK 2016 government mandate expresses the need for efficient BIM methodologies, e.g. stakeholder collaboration and utilization of BIM standards, in its 2011 Government Construction Strategy, and the Irish AEC/FM sector (and EU in general) are following suit with these guidelines, standards, and protocols.
Image Courtesy: webimglobal.com

~~~~~~~~~~~~~~~~~~

Published By

Arka Roy

~~~~~~~~~~~~~~~~~~